December 28, 2016, 12:20 am
Hello JDEList,
Can any one help me on the below mentioned scenario.
When I select multiple lines for editing on few of the column values from find and browse form, the same lines needs to populate in header less detail form.
Once my modifications completed the rows should update.
I am aware of edit a single row from find and browse to fix inspect or header less detail form. I need guidance on multiple rows populate in edit mode of header less detail form.
Your help would be more appreciated on this.
Regards,
Suren.
↧
December 28, 2016, 5:57 am
Hello LIST:
I'm creating a simple application consisting of a Find/Browse (Work w/ xxxxxx) to Fix/Inspect (Edit Revise xxxxxx) over a single table both forms sharing same BSVW.
Does anyone know of a similar interactive in E1 as good starting point similar to DATABROWSE application?
Thanks in advance.
John
↧
↧
December 28, 2016, 6:48 am
We have a set of jobs (a big list of reports) running on the JDE scheduler only during Mon thru Fri.
Question :
How do we set the JDE scheduler to run the same set of jobs only on a particular Saturday?.
Is there any easy method without having to create another entry for every report in that set.
Any insights? Please help.
↧
December 28, 2016, 7:35 am
Anyone have any issues with PCMiler V27 causing kernel corruption. Recommendation from PCMiler is to either remove the redundant calls to PCMOpenServer/PCMCloseServer, however I do not see where that can be done other than B4901860
From PCMiler
What you should be doing is making a connection to the PC*MILER Server (PCMSOpenServer) when the application starts and then closing the connection (PCMSCloseServer) when the application is exited. By doing this you will avoid having to constantly make new connections and load the data.
↧
December 28, 2016, 1:42 pm
P95620 lets you use/define multiple templates (TP1 and TP2 ) on its grid line.
Questions:
1. If a Report and Version has P95620 showing 2 templates on its grid - How does the BV report version that is run know which template to use (TP1 or TP2)
2. If a Report has no versions on P95620 but has 2 templates showing on its grid -- how do you pick the template (TP1 or TP2) you want to run when running report via P95620
So far I have always assigned only one template to a report and version using P95620 which works really well but I am now exploring P95620 functionality a little more.
I have a requirement to print 10 different Notice Letter Formats based on the State and was wondering if there is an easy way to get this done rather than defining 10 different RD names , assigning it to each report version with different templates and setting the corresponding RD name on the version level RD set up (as always)
↧
↧
December 29, 2016, 1:20 am
Hi,
We have a requirement creating new batch types and ledger types with custom applications which are replication of P0911 and R09801 along with R11411 for posting and restatement of entries. We have copied the B0900049, B0000055 and B0900023 which are part of batch creation, restatement and multicurrency AM entries for F0911. While we were able to create the new batches and with say 'RX' batch type for multicurrency the posting report R5509801 goes well but it didn't call the R5511411 report for restatement, instead the batch says error status.
Are there any other settings need to be done for AR, CR and XR ledger types we have considered every where the BSFN points to AA,CA and XA. If its a single currency then posting goes well and it creates the restatement batch type 'RE'. Attached are the ER code for R5509801 and also the R5511411 report.
Kindly help us how to get rid of the AM entries not getting created out for the batches.
JD Edwards Enterprise One
Tool Release: 9.1.3
Thanks
-Deva
↧
December 29, 2016, 2:32 am
Is there any report exist in JDE E1 8.12 to summarize the all the financial transactions for AR and AP in one report.
It will look like
Supplier/Customer Name, Supplier/ Customer flag, Each G/L Class Code(AP01, AR01, SADV etc) and its corresponding summary.
↧
December 29, 2016, 3:15 am
We are planning to upgrade from FormScape 3.3 version to Transform 3.3 with OneWorld Xe. Appreciate your help on the following.
a). Is Transform 3.3 supported with OneWorld Xe?
b). Do we need to redesign/rebuild the existing FormScape reports in Transform?
c). What are the prerequisites/MTRs for Transform 3.3 with OneWorld Xe?
Thank you
↧
December 29, 2016, 5:44 am
All,
How to identify all the current back orders (F4201) or back ordered lines (F4211).
I understand that SDLTTR can be 900, 902, 904, 909 for back order lines. however i read that this status remains same even after order line is released. so is there a way to identify the current back orders?
Apart from the status, adding additional condition like SDSOBK != 0 is correct? or do i need additional conditions to determine all current back orders?
Any help is appreciated.
↧
↧
December 29, 2016, 5:51 am
All,
Can anyone please help me with the following. I wanted to identify all the current back orders / back order lines.
If i go with the following conditions is this correct or do i have to add any additional filters / conditions.
SDLTTR in (900, 902, 904, 909) and SDSOBK != 0
Please help me. I am little new to JDE, if you think the question is very primitive, please excuse me.
Any help is highly appreciated.
Thanks,
Pothuri
↧
December 29, 2016, 11:26 am
Hi All,
We are looking for a approach to upgrade/migrate from FormScape 3.4.3 to Transform 3.0. If any of you have any prior experience in this please reply.
Happy Holidays and Happy new year !!!
PD
↧
December 30, 2016, 8:50 am
We are on E1 9.0, tools 9.1.4.7.
We use business function B4700230 to copy a flat file as part of some of our interface processing. We get a file from Concur for expenses that we process and create journal entries. In this process we copy the original text file form Concur to an archive location. Usually the file is around 9,000 KB and takes just a few minutes to copy. The current file is 15,000 KB and has been copying for several hours. Its copying but very slowly.
Any ideas from anyone why a file about 50 % larger than normal would take so long. Its still running and appears it will take about 6 hours to do a copy of this file using B4700230.
Or any ideas as to where to start looking? I've looked at JDE server manager but there appears to be nothing I can see to explain the slowness. All other aspects of JDE are running fine and normal. Coincidentally, if we look back to year ago, this large year end file form Concur also took a long time to run. So its almost like there is some size above which , this function does its copy functionality very slowly.
↧
December 28, 2016, 7:35 am
Anyone have any issues with PCMiler V27 causing kernel corruption. Recommendation from PCMiler is to either remove the redundant calls to PCMOpenServer/PCMCloseServer, however I do not see where that can be done other than B4901860
From PCMiler
What you should be doing is making a connection to the PC*MILER Server (PCMSOpenServer) when the application starts and then closing the connection (PCMSCloseServer) when the application is exited. By doing this you will avoid having to constantly make new connections and load the data.
↧
↧
December 28, 2016, 1:42 pm
P95620 lets you use/define multiple templates (TP1 and TP2 ) on its grid line.
Questions:
1. If a Report and Version has P95620 showing 2 templates on its grid - How does the BV report version that is run know which template to use (TP1 or TP2)
2. If a Report has no versions on P95620 but has 2 templates showing on its grid -- how do you pick the template (TP1 or TP2) you want to run when running report via P95620
So far I have always assigned only one template to a report and version using P95620 which works really well but I am now exploring P95620 functionality a little more.
I have a requirement to print 10 different Notice Letter Formats based on the State and was wondering if there is an easy way to get this done rather than defining 10 different RD names , assigning it to each report version with different templates and setting the corresponding RD name on the version level RD set up (as always)
↧
December 29, 2016, 1:20 am
Hi,
We have a requirement creating new batch types and ledger types with custom applications which are replication of P0911 and R09801 along with R11411 for posting and restatement of entries. We have copied the B0900049, B0000055 and B0900023 which are part of batch creation, restatement and multicurrency AM entries for F0911. While we were able to create the new batches and with say 'RX' batch type for multicurrency the posting report R5509801 goes well but it didn't call the R5511411 report for restatement, instead the batch says error status.
Are there any other settings need to be done for AR, CR and XR ledger types we have considered every where the BSFN points to AA,CA and XA. If its a single currency then posting goes well and it creates the restatement batch type 'RE'. Attached are the ER code for R5509801 and also the R5511411 report.
Kindly help us how to get rid of the AM entries not getting created out for the batches.
JD Edwards Enterprise One
Tool Release: 9.1.3
Thanks
-Deva
↧
December 29, 2016, 2:32 am
Is there any report exist in JDE E1 8.12 to summarize the all the financial transactions for AR and AP in one report.
It will look like
Supplier/Customer Name, Supplier/ Customer flag, Each G/L Class Code(AP01, AR01, SADV etc) and its corresponding summary.
↧
December 29, 2016, 3:15 am
We are planning to upgrade from FormScape 3.3 version to Transform 3.3 with OneWorld Xe. Appreciate your help on the following.
a). Is Transform 3.3 supported with OneWorld Xe?
b). Do we need to redesign/rebuild the existing FormScape reports in Transform?
c). What are the prerequisites/MTRs for Transform 3.3 with OneWorld Xe?
Thank you
↧
↧
December 29, 2016, 5:44 am
All,
How to identify all the current back orders (F4201) or back ordered lines (F4211).
I understand that SDLTTR can be 900, 902, 904, 909 for back order lines. however i read that this status remains same even after order line is released. so is there a way to identify the current back orders?
Apart from the status, adding additional condition like SDSOBK != 0 is correct? or do i need additional conditions to determine all current back orders?
Any help is appreciated.
↧
December 29, 2016, 5:51 am
All,
Can anyone please help me with the following. I wanted to identify all the current back orders / back order lines.
If i go with the following conditions is this correct or do i have to add any additional filters / conditions.
SDLTTR in (900, 902, 904, 909) and SDSOBK != 0
Please help me. I am little new to JDE, if you think the question is very primitive, please excuse me.
Any help is highly appreciated.
Thanks,
Pothuri
↧
December 29, 2016, 11:26 am
Hi All,
We are looking for a approach to upgrade/migrate from FormScape 3.4.3 to Transform 3.0. If any of you have any prior experience in this please reply.
Happy Holidays and Happy new year !!!
PD
↧